FloArm Hard Q Price in Bangladesh

Description

Product Description:
FloArm Hard Q is a ready to use Non-Metallic floor and surface hardener, it is a factory blended powder containing special hard-wearing aggregates. FloArm Hard Q is a blend of port land cement and special additives which produces material easy to trowel into fresh wet concrete. FloArm Hard Q provides a dense non-porous surface which is extremely hard wearing and abrasion resistant. It can be applied for wet rooms as well as outdoor applications.

Uses:

FloArm Hard Q provides a good abrasion resistant concrete surface by dry shake method which ensures monolithic bonding with the fresh laid concrete Recommended for the following area

• Loading and unloading bays,
• Machine shops,
• Packing areas,
• Storage area,
• Work shops

Features and Benefits:

Non-Metallic Does not rust Easy to trowel into the fresh surface concrete Reduces Surface wear which are non-dusting Extend the life of the flooring with increased Impact and abrasion resistance Monolithic bond with the base concrete Facilitates easy cleaning Suitable for repairs of old floors and toppings for new floor The surface density is high, increased resistance to Oil and grease penetration Economical

Application Method:

Substrate requirement & Application:
Base concrete:
The base concrete should have minimum cement content of 300 Kgs/cm2 .The concrete mix should be designed to minimize segregation and bleeding with free W/C ratio less than 0.50. The concrete should be pumpable with minimum slump of 80mm to 100mm. Use of MYK Arment water reducing concrete Admixtures is recommended
Broadcasting:
Level the freshly poured concrete with suitable mechanical equipment and smoothen it with mechanical tool like trowel etc. Before commencement of the application, the base concrete should be checked by pressing thumb hard on the surface, it should leave an impression of 3 to 5 mm depth.

The application is made in two stages
1) The first application is made using 50% to 70% of the required material. It is evenly broadcasted manually on the Concrete surface and when the material or surface becomes dark by absorbing the moisture from the concrete the first application can be floated. Wooden floats or power trowels with disc can be used. Care should be taken that it is not over floated.

2) The second application is made immediately after by evenly broadcasting the balance material and when the surface becomes dark by absorbing the Concrete surface moisture has darkened with the absorption of water it shall be floated in the same way as before.

3) Final finishing shall be carried out after the surface has sufficiently stiffened to close any pores and to remove any disc marks.

4) While applying FloArm Hard Q at the edges of the concrete floor or, at the end of bays, extra precaution should be taken by way of sprinkling more material and finishing it smoothly with a steel trowel. This is an additional protection particularly to bay edges where the reaction due to heavy impact is more

Packaging: 5 kg pack.

Storage and Shelf Life: 12 months if stored in cool dry shaded condition in
original sealed pack.

Health & Safety:

FloArm Hard Q should be applied with gloves and care should be taken to see that it does not fall on skin or eyes. Splashes on to eyes have to be immediately washed with plenty of clean water and medical advice has to be taken.

Legal Note:
The information, and, in particular, the recommendations relating to the application and end-use of MYK Arment products, are given in good faith based on MYK Arment current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with MYK Arment’s recommendations. In practice, the difference in materials, substrates and actual site conditions are such that no warranty in respect of merchant ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. the user of the
product must test the product’s suitability for the intended application & purpose. MYK Arment reserves the right to change the properties of its products. the proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local product data sheet for the product concerned copies of which will be supplied on request.