Description
Description:
Reebaklens RR cleaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents
and is supplied as a clear green solution.
Uses:
Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / micro concrete. It can also be
used on ohter steel surfaces prior to coating with epoxy systems.
Advantages:
Rapid action
Safe with metals (except zinc and galvanized steel), wood, glass, plastic and rubber. No corrosive action. Penetrates
oil and grease.
Technical Support:
Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical
assistance in locations all over the country.
Properties
Specific gravity : 1.16 – 1.22 @ 250C
Application instructions
For rusted metal (iron base)
Apply Reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours.
After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days. Before
applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.
Removal of rust and mill scale
Prewet the floors, then using a stiff bristle broom, brush the affected areas with a solution of Reebaklens RR cleaning
agent and water. Strength of the solution required will vary but should be between 1 : 1 and 1 : 4 (Reebaklens RR
cleaning agent to water).
When the action has finished, wash down thoroughly with clean water. Wire brush again to remove remaining loose
material and finish by thoroughly washing down with clean water. Repeat if necessary. High degree of rust or scale can
be removed by soaking in the Reebaklens RR cleaning agent solution for 60 minutes.
Estimating
Coverage
Approx. 2.0 – 2.5 m2/L
Note coverage depends on the rusted area and the depth of
deposition.
Packaging
Reebaklens RR cleaning agent is available in 1, 5 and 20 L containers.
Storage
Shelf life
At least 1 year in original sealed containers under normal warehouse conditions.
Precautions
Health & Safety instructions
Reebaklens RR cleaning agent is acid based and should be handled with care. It attacks zinc, aluminium and putty. If in
doubt about its effect on a material, test a small area before application. Avoid contact with skin. Rubber gloves and goggles should be worn. Wash spillages with plenty of water. Enclosed areas should be well ventilated. If contact with eyes occur, wash immediately with water and seek medical advice.
Fire
Reebaklens RR cleaning agent is non flammable.
Additional information
Technical data and guidance can be provided on a wide range of admixtures, concreting aids, grouts, repairs, Protective
coatings and the Nitoflor range of industrial flooring systems which includes non metallic floor hardeners, epoxy floor
coatings and self levelling floor toppings, epoxy heavy duty abrasion resistant screeds. Separate datasheets are available on these products
Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice, recommendation specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products whether or not in accordance with any advice, specification, recommendation or information given by it
Reviews
There are no reviews yet.