Nitotile MPA Price in Bangladesh

Description

Nitotile MPA Price in Bangladesh

Multipurpose tile adhesive for exterior, tile-on-tile, tile-on-glass and specialized applications.

Description:
Nitotile MPA is a single component, polymer modified cement based grey colored powder.

Uses:
Nitotile MPA tile adhesive is a high-quality adhesive used for the permanent fixing of tiles over smooth surfaces such as existing tiles, ceramic tiles or glass, subjected to damp and tropical conditions and for specialized applications such as tile on tile and tile-on-glass etc.

Advantages

• Polymer modified – prewetting of tiles not required and hence less prone to cracking of mortar
• Single component – ease of application
• Nontoxic – User friendly application
• Excellent adhesion on smooth surfaces – Develops high adhesive bond strength
• Non-shrink – excellent bond with the substrate
• Excellent work and open wet time of 2 hrs. at 300C
•  allows the mason to fix tiles at ease even under hot conditions
• Self-cure – does not require external curing
• Forms a dense and impermeable mortar bed – waterproof

Standard compliance:
Nitotile MPA meets / exceeds the requirements for tensile adhesive strength of BS 5980-1980, Class AA, A & B

Technical support:
The company provides a technical advisory service supported by a team of specialists in the field.

Application instructions
Surface preparation
All surfaces must be sound and thoroughly clean before Nitotile MPA is applied. All traces of grease or oil must be
removed with suitable degreaser. All loose particles of mortar, old wallpaper, paint etc., must be physically removed. In case of cementitious surfaces, the areas of application must be thoroughly wetted with water to obtain saturated surface dry condition. In case of smooth surfaces, prewetting of substrate with water is not essential.

Mixing:
Nitotile MPA should be mixed with water in the ratio of 3: 1 by volume or 4:1 by weight. While mixing, add powder to the
water to avoid lump formation. A slow speed drill fitted with a suitable mixing paddle is recommended for mixing. Hand
mixing may also be resorted to if small quantities are mixed. (Note: Use of chilled water in extreme temperatures will
increase open time of Nitotile MPA).

Application
Nitotile MPA , is spread on the substrate to a uniform thickness of 2 – 3mm. This is then combed horizontally with a notched trowel. The tiles are then placed firmly into the adhesive bed ensuring good contact with the mortar by a twisting motion.

Finishing:
The excess material shall be removed with a damp cloth before it sets. Joint grouting with Nitotile Grout may be commenced 24 hours after tiles have been fixed.

Estimating
Packaging
Nitotile MPA is supplied in 25 kg, 15 kg and 5 kg bags.

Coverage
Approximately 3.8 kg of Nitotile MPA is required perm when uniformly applied at 2mm thickness. Material consumption will increase if the substrate is not even.

Storage
Shelf life
6 months in unopened bags under normal warehouse conditions.
Nitotile MPA must be stored in a cool dry place.

Precautions
Health & Safety instructions
Nitotile MPA is cement based and hence alkaline in nature. Care should be taken to avoid inhalation of dust and contact
with skin and eyes during use.

Additional information:
The Fosroc range of associated products include high strength cementitious and epoxy grout, polyester resin based
mortar for rapid presetting of steel shims to level or for direct bedding of small base plates. Also available a range of
products for use in construction; viz., admixtures, curing compounds, release agents, flooring systems, repair mortars,
sealants and waterproofing compounds. Separate datasheets are available on these products.

important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Fosroc endeavors to ensure that any advice, recommendation specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products whether or not in accordance with any advice, specification, recommendation or information given by it.