Jolly Bitulex Bitumen Impregnated Expansion Joint Filler Board

CHARACTERISTICS : JOLLY BITULEX

• IS PROCESSED FROM CANE FIBER AND BITUMEN. THE COMBINATION OF THESE RAW MATERIALS ARE TESTED AND PROVEN TO PROVIDE THE BEST RESILIENCE TO WEATHERING CYCLE IN CONCRETE.
• IS MADE WITH SWEDISH MACHINERY AND TECHNOLOGY, DEVELOPED THROUGH YEARS OF INTENSIVE RESEARCH.
• IS AVAILABLE IN A WIDE RANGE OF THICKNESSES AND SIZES.
• IS AN ENVIRONMENT FRIENDLY PRODUCT MADE FROM WASTE AS OPPOSED TO THE ENVIRONMENT DESTROYING THERMOCOL/PLASTIC EXPANSION JOINT FILLERS.
• THE BOARD’S COMPRESSION AND RECOVERY CHARACTERISTICS CONFORM TO THE AMERICAN, EUROPEAN, BRITISH AND INDIAN STANDARDS.
• THE MOST ECONOMICAL PRODUCT ALTERNATIVE TO POLYETHYLENE IN DRY AREAS. Suggested Application Details for Typical Joints JOLLY BITULEX 3-D DIAGRAM Jolly Bitulex is brought flush with the concrete slab and extends full depth of the slab, placed approximately ¾ of an inch below the surface of the concrete slab. A suitable sealant is applied either at the top or bottom of the slab to close the joint against hydrostatic pressure. The dowel bar is used to preserve alignment of adjacent sections of concrete slab. Jolly Bitulex is fabricated to receive dowel bars and the entire joint assembly is placed in position before pouring concrete. confirms to the following required standards of expansion joint fillers: • ASTM- D. 1751
• B.S. 6093
• IS 1838 PHYSICAL PROPERTIES that no other expansion joint fillers posses COMPRESSION Jolly Bitulex when initially subjected to a load between 689 to 5171 kPa(or 100 to 750 PSi) in order to compress it by 50% of its original thickness, it shows a loss of not more than 0.1 to 0.2 % by weight. (Permitted : less than or equal to 3% by weight). 2-D DIAGRAM (SIDE-VIEW) EXTRUSION Jolly Bitulex when compressed to 50% of its thickness with 3 edges restrained, it shows an extrusion of not more than 1 to 2mm on its free edge. (Permitted : less than or equal to 6.4mm) RECOVERY Jolly Bitulex when compressed to 50% of its thickness, it is observed that it recovers to 80-85% of its original thickness, within 10 minutes after the load is removed. Cane Fibre improves toughness and recovery properties. (Permitted : at least 70% or higher) APPLICATIONS: Ö Expansion joint filler strips in all concrete traffic surfaces like highways, airport, runways and streets. Ö Expansion joint fillers in driveways, aprons, pavements, curbs, gutters and other concrete paving work. Ö Expansion joint fillers in reinforced concrete structures like piers, UNAFFECTED BY TEMPERATURE CHANGES Jolly Bitulex expansion joint filler holds its shape without appreciable dimension change when exposed to temperature extremes. It does not get soft at higher temperatures nor brittle at lower temperatures. retaining walls, and lateral supports like abutments. Ö Expansion joint fillers are used against existing or between adjacent constructions and insets in concrete paving like drains, manholes, etc. Industrial Flooring. Ö Various other internal finishes, flat works and concrete floors according to the state of art and local regulations LOW MOISTURE ABSORPTION due to Bitumen Impregnation. EXCELLENT CONCRETE BONDING The rough textured surfaces of Jolly Bitulex provides a good bond between the expansion joint filler and poured concrete WEATHERING CYCLE Durable in all condition due to its Asphalt impregnates. DURABILITY AND EASY HANDLING LOAD HANDLING ABILITY Jolly Bitulex is tough and maintains its thickness and surface finish under loading and stacking. Due to Bitumen Impregnation it resists absorption of water. This material withstands severe environmental conditions for very long periods of time. Jolly Bitulex compresses under the pressure and expands back quickly to its original shape showing good elastic property. Thus preventing the concrete from cracking.

OUR BOARD ARE MADE FROM SUGAR CANE FIBER WASTE. CANE FIBERS ARE LONGER, TOUGHER AND MORE RESILIENT FOR SUPERIOR EXPANSION AND CONTRACTION IN FILLER BOARDS. ASPHALT MAKES THE BOARDS VERY TOUGH AND DURABLE AS WELL AS INCREASES THE LIFE SPAN OF THE PRODUCT. JOINT FILLER BOARD IS INSTALLED ALONG WITH THE STEEL GRID WORK. AFTER THIS PROCESS IS COMPLETE THE CONCRETE IS POURED INTO THE GRID WORK BASIC METHOD OF APPLICATION APPLICATIONS / USAGE OF BITUMEN BOARD FILLER BOARDS JOLLY EXPANSION JOINT FILLER IN AIRPORT RUNWAYS JOLLY BITULEX JOLLY BITULEX JOLLY EXPANSION JOINT FILLER BETWEEN BEAMS & COLUMNS IN BUILDINGS JOLLY EXPANSION JOINT FILLER IN BRIDGE JOLLY BITULEX APPLICATIONS / USAGE OF BITUMEN BOARD FILLER BOARDS APPLICATIONS / USAGE OF BITUMEN BOARD IN TANK BASE JOLLY BITULEX JOLLY EXPANSION JOINT FILLER IN PAVEMENT JOLLY BITULEX JOLLY EXPANSION JOINT FILLER IN SIDE WALK JOLLY BITULEX JOLLY EXPANSION JOINT FILLER IN COLUMN JOINTS SIZES THICKNESS Standard sheet sizes: 7.3’ x 4 ft – 2200 x 1220mm 8 x 4 ft – 2440 x 1220mm (Other sizes available on requests) 10 – 12 – 18 – 25 mm BITUMEN CONTENT QUALITY GUARANTEE 35% Bitumen Content as per ASTM and other established standard, we also supply 10-20% Bitumen content as per customers’ requirements. Strict monitoring by our on site quality control engineer TECHNICAL TEST REPORT OF JOLLY BITULEX EXPANSION JOINT FILLER TEST AS PER ASTM D1751 25 MM THICK 35% BITUMEN CONTENT 1. Dimension Thickness (mm) 25M 2. Compression a. Stress applied for compressing specimen to 50% of its thickness 2800-3200 KPa b. Loss in Weight after application of Stress 0.1-0.2 % 3. Extrusion (mm) After compressing to 50% of the specimen’s thickness 0.5mm 4. Recovery (%) 10 minutes after compressing to 50% of the specimen’s thickness 75-80% 5. Density (kg/m³) 330-350 6. Water absorption (%) 15 % 7. Asphalt content (%) 36-37% TEST AS PER ASTM D1751 18 MM THICK 20% BITUMEN CONTENT 1. Dimension Thickness (mm) 18.3M 2. Compression a. Stress applied for compressing specimen to 50% of its thickness 2400-2700 KPa b. Loss in Weight after application of Stress 0.1-0.2 % 3. Extrusion (mm) After compressing to 50% of the specimen’s thickness 0.5mm – 1mm 4. Recovery (%) 10 minutes after compressing to 50% of the specimen’s thickness 82-85% 5. Density (kg/m³) 300-330 6. Water absorption (%) 50 % 7. Asphalt content (%) 20-23% DATA SHEET OF 10% JOLLY BITUMEN BOARD AS PER BRITISH STANDARD 6093 PROPERTY SPECIFICATION JOLLY BOARD BRITISH STANDARD 6093 limits 1. Density Range Kg m³ Ø 270 to 300 200 to 400 2. Pressure for 50% Compression N mmˉ² Ø 2.5 to 3.8 0.7 to 5.2 3. Resilience % recovery after compression Ø 75 to 80 70 to 85 4. Tolerance to water Immersion Ø

Suitable if immersion is infrequent Suitable if immersion is infrequent JOLLY BOARD LTD.,

A VIEW OF AURANGABAD MANUFACTURING FACILITIES JOLLY BOARD LTD., A VIEW OF SANGLI MANUFACTURING FACILITIES 501, Rewa Chambers, 31 Sir V.Thackersey Marg, Mumbai-400 020 INDIA. Tel: 22078531/22032726 Fax: 91-22-22069533 Email: jollyboard@jollyboard.com / arjun@jollyboard.com Web : www.jollyboard.com

Additional Information: Mother’s Technology Construction Chemicals Company Provides a wide range of products specifically designed for the repair and refurbishment of damaged reinforced concrete. These include hand placed and trawellable repair mortars, fluid micro concretes, chemical resistant epoxy mortars and a comprehensive package of protective coatings. In addition, a wide range of complimentary products are available. These include admixtures, joint sealants, waterproofi ng membranes, grouting, anchoring, and specialised flooring materials. Separate datasheets are available on these products.