Proofex Torchseal 3PI Price in Bangladesh

(0 customer reviews)
Original price was: ৳ 7,000.00.Current price is: ৳ 6,500.00.
Sale!

In Stock

Contact Information:
Mother’s Technology
01912910323
motherstechnologybd@gmail.com

Proofex Torchseal 3PI

3mm Plain Finish Torch applied waterproofing
membranes.

Product Type

APP Torch-Applied Membrane

Thickness

3mm

Reinforcement

Non-woven Polyester Fabric

Roll Size

10 m × 1 m

Shelf Life

12 Months (Cool, Dry Storage)

Description

Proofex Torchseal 3PI – Advanced Waterproofing Solution

Description:

Proofex Torchseal 3PI is a premium APP-based torch-applied waterproofing membrane manufactured with high-quality polymer-modified bitumen and reinforced with a non-woven polyester fabric core. This reinforcement provides excellent mechanical strength, high elongation, and superior puncture resistance. Ideal for a wide range of waterproofing applications, Proofex Torchseal 3PI ensures long-lasting protection in basements, roofs, tunnels, car parks, and civil engineering structures. Its chemical resistance makes it suitable for aggressive groundwater environments.

Uses:
To provide waterproof ng and damp-proof membranes for:

  • Concrete roof and Fl our slabs
  • Shallow Basement Tankings
  • Car park deck slabs
  • Concrete retaining structures
  • Tunnels and subways

Advantages:

  • High strength reinforcement gives excellent resistance to puncture and stress
  •  Easily torch applied
  • Readily formed to contours

Specific cation:
The waterproofing membrane shall be Proofex Torchseal 3PI a high-performance APP based torch applied 3mm thick plain membrane, manufactured from high quality polymer – modify ed bituminous compounds and reinforced with non-woven polyester fabric.

Instructions for use
Surface preparation
Concrete surfaces should be Fl oat fi noshed and free from cavities and projecting nibs. All surfaces shall be dry and free from frost, surface laitance and contamination.

Priming
Proofex Torchseal Primer must be applied to the substrate and allowed to dry until it is tack free, prior to the application of
the membrane. All surfaces must be re-primed if left for more than 24 hours prior to the application of Proofex Torchseal
membranes.

Application
The membrane is unrolled and placed in the correct position where it is to be torched on later. During each stage, each roll
must overlap the next layer by at least 10cm. The membrane is rolled back without changing the orientation. The rolled membrane is slowly unrolled again, while its surface is lightly heated, transversally, by means of a propane gas torch, thus causing surface melting and subsequent adhesion to the surface. End joints should be made with a minimum of 15cm overlap.

Application tools and equipment:
The tools and equipment required to apply Proofex Torchseal 3PI membrane include a propane gas torch with related gas
cylinder, a knife for cutting the membrane to size and a trowel with a rounded tip. Protective gloves and goggles are necessary when using the gas torch.

Estimating
Supply
Proofex Torchseal 3PI:                    10 m long x 1m wide roll
Proofex Torchseal Primer:               20 and 200 litre drums
Coverage
Proofex Torchseal Primer:               0.2 – 0.8 lt/m²

Storage
All products have a shelf life of 12 months if stored in a cool, dry store, away from sources of heat, in the original unopened packing. It should be stored horizontally, not more than one pallet high.

Precautions
Health and safety
If Proofex Torchseal Primer is swallowed, do not induce vomiting – drink a glass of water. If contact with eyes occurs, Fl old with copious amounts of clean water for at least 15 minutes and seek medical advice. If on the skin, remove any contaminated clothing and wash skin thoroughly.

For further information, please consult Material Safety Data
Sheets for the above products.
* Denotes trademark of Fosroc International Ltd.

Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Fosroc endeavors to ensure that any advice, recommendation, specific cation or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products whether or not in accordance with any advice, specific cation, recommendation or information given by it.

Additional information

Product Type

APP Torch-Applied Membrane

Thickness

3mm

Reinforcement

Non-woven Polyester Fabric

Roll Size

10 m × 1 m

Shelf Life

12 Months (Cool, Dry Storage)

Reviews

There are no reviews yet.

Be the first to review “Proofex Torchseal 3PI Price in Bangladesh”

Your email address will not be published. Required fields are marked *

Mother’s Technology Bangladesh is a Construction engineering, contracting, and service offering company that provides total construction solution systems.

Sat - Thu:

09:00 Am - 10:00 PM

© 2025, Mother’s Technology Bangladesh | Developed by Kalbi Tech